Camera Research – Two Streams

Camera research has taken a lot of my time lately as I am finalizing my options. At this point it seems like a good idea to have two recording systems on the bike. This will be an expensive option, but possibly worth it. A lower resolution, “always on” system that will record every time I ride the motorcycle and a removable high resolution camera that I will control while riding. My previous research can be found here, and much of this page will refer back to systems I have already considered, when adding new information.

Low Resolution Camera

The low-resolution camera and recording system can be integrated into the motorcycle electrical grid, so it can operate as any electrical accessory, in the background. The image is highly compressed, so not as much memory is required to store hours of video. The downside of this is that the video will not be high enough quality to fill a large screen, but the benefit is that I won’t miss some great moment because I didn’t have the camera turned on. I do intend to artistically re-purpose this footage, not just present a travel diary; so split screens and vignettes can integrate lower resolution material, particularly if I catch something interesting.

Equipment Sources

The On-Bike TV site is now OnBoard TV and they carry the Bullet DVR recorder and the ubiquitous 560 line Sony camera. The camera has been improved since December and now has interchangeable lenses. HelmetCamera.com has a similar package and a Canadian company, Micro Video Products has equipped other motorcyclists.

The proven advantages of these systems are many, as they can be wired directly into the bike’s electrical system, the equipment is very small and easy to install and the flash memory is inexpensive and commonly available. It can be mounted on the motorcycle, more or less permanently, so that it is a very easy task to record constantly. The disadvantages are in the video quality and the difficulties I have had in editing compressed file formats. I find .avi to be the most widely accepted by editors and MEPG4 to be difficult to edit without converting the file. As soon as the file is converted, there is usually a degradation in quality. I will have to now look at available editing tools to see if editing technology has caught up with MPEG4 as this is an essential factor in choosing a system.

High Resolution Camera

The high-resolution camera is requiring a lot of research. There are a lot of options on the horizon right now and the introduction of High Definition (HD) video as a viable, affordable option has changed the “pro-sumer” marketplace. There are many independent video producers who are driving the demand for broadcast quality recording and with recent advances in technology, some are achieving big screen release with low budget gear.

My research last year pointed me towards cameras that had 3 charge-coupled devices (CCD) in Standard Definition (SD) cameras as having the best quality recording, and three CCD cameras still do capture the best quality colour because they use a different sensor chip for each colour — red, green and blue (RGB). Reds in particular are hard to capture and true black is always elusive, although PAL format is supposed to be better than NTSC. PAL format is mainly used in Europe and NTSC in North America and the formats are not interchangeable, although they can be converted.
Now High Definition (HD) cameras have become more available, the 3 CCD models are very expensive, packed with professional features and quite large in size. It has been argued that HD with a single, larger CCD chip recording more lines of resolution can offer comparable results to an SD with three smaller size chips, even though the colour might be a little more washed out. There are a lot of “D”‘s for definition in this alphabet soup because it is the operative word in video quality. Continue reading Camera Research – Two Streams

Motorcycle Camera Mount Research

There are many people recording video from moving motorcycles, so I decided to post a few links to show some of the mounting technologies that I might use to attach a video camera to the Yamaha FJ motorcycle.

This is a Suzuki motorcycle, but my Yamaha has the same type of gas tank fill cap. I don’t have a grab bar on the back similar to where the second camera is mounted.

Videos made by pashnit.com to promote their group tours in the U.S. are edited well and show the group riding safely. Jones Helmet camera system has made videos of racing motorcycles, sailboats and even hot air balloons. Youtube and other video sites feature countless video clips taken with helmet cams and other video capture devices, but the quality is extremely uneven. I have not yet found anyone who is streaming directly from a motorcycle except for GP and other races that feed to a nearby truck, not directly on to the internet.

European motorcycle riders also have posted video of rides in the Alps, but they are not for the safety oriented. They are definitely in the sport bike category, with tips on penalties for speeding around the world. Don’t speed in Norway or you will loose your license! Fortunately, Canada is listed as one of the most reasonable on this topic, however, my license is completely clean and I intend to keep it that way. I may tour though Montana on my way home to make some “need for speed” video footage as there are no speed limits outside of certain zones there. That is definitely outside the scope of this tour.

These video examples give you an idea of the good quality of video production that can be obtained using consumer grade video equipment. One of the major writers of the pashnit site is a former Yamaha FJ 1200 owner who claims to have ridden over 30,000 miles on the bike before he sold it.

Here is the most economical mount yet …. the $5. camera mount. The sound on his video is mostly wind noise as he has no windshield. Great idea though. Unfortunately, my FJ has a very different system for the handlebars. Another problem is my windshield is so opaque that I don’t think I should take any video through it. That brings me to the idea of mounting a camera on my helmet.  Continue reading Motorcycle Camera Mount Research