Live More Lightly - . . . saving our environment one small action at a time

Knight News Challenge 2008

It is time again for the Knight News Challenge, a contest that funds ideas for using open source internet tools.

Funded by the Knight Foundation, the contest seeks to assist the development of internet news that serves a constituency of readers.

There are only four rules. Winning entries must:

   1. Use or create digital, open-source technology;
   2. Use news and information to serve the public interest;
   3. Benefit at least one specific geographic community;
   4. Be innovative.

The Live More Lightly Project entered an application last year, but was unsuccessful. This year, I will try to make the case that I [Victoria] am an internet griot or troubador who is delivering the message of personal responsibility for the environment. Changing the world, one personal action at a time.

The project has evolved since last year, but because I have received no funding, my progress has been slower than I hoped. I will post my application here for comment.

Live More Lightly Knight News Challenge Application — You still have time to vote for me.

I only asked for $5,000. because that would be enough to do the tour and really investigate the on-line streaming video concept. Unfortunately, I have been turned down again. I will keep on trying to get the needed funding to complete my project.

School Workshop in Powell River

It rained on the Sunshine coast, then it poured. My trusty motorcycle held the road and responded to my needs. I remembered the good advice I had received long ago from a trucker. “Never out run your lights”. I kept the throttle to a point where I could follow the cat’s eyes shining yellow/orange on the centre line.

The amazing thing is that I didn’t get really wet. I am wearing my summer mesh jacket over a fleecy, but if I lean on my tank bag the windshield and my full-face helmet keep a lot of the rain off my upper body. The rain brought warmer temperatures too. I thought I would get really cold in the clear night after I missed the earlier late-afternoon ferry while sitting in rush-hour traffic. When did the traffic get this bad going to the North Shore? I never want to have a job where I have to drive in rush hour everyday, but with an air-cooled bike it was not going to work.

I used every back road trick I know and still ended up in a line-up that really worried me, especially when the bike started to smoke a bit. Yipes! I was really glad to get over the 2nd Narrows Ironworkers Memorial Bridge and cool off my distressed engine.

I caught the last possible ferry out of Horseshoe Bay to Langdale and when I got off that ferry, it was dark and misting heavily. I knew my bike would be cool at least, so I rode that twisty highway at an unhurried pace. I arrived at the north end of the coast and met a friendly ferry worker who rides a collector-plated Bonneville. He let me go in the office and gave me tea. Bless his heart, he told me stories of riding before I was even born.

Now I am in Powell River, surprised at how warm and dry I remained. I hope my computer didn’t get too wet. It will be wrapped in plastic in future until I get my hard bags. So far, this is The Live More Lightly Tour ’08!

Here is a brief excerpt of the teacher’s opinion of the Live More Lightly Workshop. I am delivering the DVD of the two sessions I did to try to arrange more workshops, so wish me luck.

lml_teachers

Live More Lightly Workshop in Schools

Schools are back in session and I am now trying to coordinate presenting a “Live More Lightly Workshop” to school-age youth. The deadline for a showcase application to Artstarts in Schools is October 17th and I must have a video by then. I am still working on preparing the book, but financial considerations have limited the time I have been able to spend developing the environmental section. The book may act as a teacher resource guide as I am putting so much environmental information in the book and on my Sources of Inspiration Page.

Most of the work I have done recently on my blog and the project is administrative tasks that are not too exciting. However, I am excited about the possibility of facilitating a workshop in Powell River soon and having my friend Judy capture the action on a video. Now I have updated WordPress, I can add video and podcasts. It is always a concern of parents when considering allowing their children to be in a video posted to the internet, but I hope that I will be able to form a community of environmental supporters. Everyone seems to be less concerned when there are hundreds of videos — I’ve seen countless children on Youtube.

I will be networking with more environmental education sites and I hope that many people will know “The Live More Lightly Song” by the end of the year.

Ubuntu Hardy + Free Firewire Drivers + Jackd

Since I came back from Seattle the Saffire audio device has been firmly installed at Waterlou Studios where it works very well with the G4 OSX 10.3.9 and G5 quad-core OSX 10.4. It has been challenging to get all the applications working on this newly installed platform and I have not had much time to putter away on my home system. Paul, our friend Barry and I also spent time going to a demo of the WAVES Logic plug-ins with Eddie Kramer as the keynote speaker, which was fun. I couldn’t resist making a few comments to the Apple reps about the new Logic Studio. It is an inspiring tool for Paul and I to have in our musical hands, but I still want to pursue my own mobile recording set-up.

Remember the WordPress motto when reading this: “Code is poetry.”

The last steps I took on activating the music recording capabilities of my ASUS notebook included installing the ffado drivers and (with help from Robin B. in Seattle) making sure the “raw1394” kernel module is loaded on boot. This can be checked in terminal (sudo modprobe raw1394) and I did find that the Ubuntu Studio control that I installed was not a reliable indicator that the raw kernel module was in fact loaded. Even after checking the box in the GUI loaded from System>Administration>Ubuntu Studio, I still was asked for my password to activate the raw kernel in terminal.

There is a post on the ffado site that describes how to check if jackd is reading the ffado driver from terminal here. Unfortunately, I get the reading:

victoria@u-live:~$ jackd -R -d firewire -v4
jackd: unknown driver ‘firewire’

I think my problem might be with jackd rather than with the ffado driver itself. I was following the install instructions on the ffado trac site — Pieter writes encouragingly at the top “It’s very easy”, but forgets to add “…if you are a Linux programmer”. I have the latest RT (realtime) kernel installed and all of the dependencies except the python-qt.

victoria@u-live:~$ sudo apt-get install scons libiec61883-0 libiec61883-dev libavc1394-0 libavc1394-dev libxml++2.6c2a libxml++2.6-dev liblo0 liblo0-dev docbook-utils libexpat-dev libdbus-1-dev pyqt-tools python-dbus python-qt
Reading package lists… Done
Building dependency tree
Reading state information… Done
scons is already the newest version.
libiec61883-0 is already the newest version.
libiec61883-dev is already the newest version.
libavc1394-0 is already the newest version.
libavc1394-dev is already the newest version.
libxml++2.6c2a is already the newest version.
libxml++2.6-dev is already the newest version.
liblo0 is already the newest version.
liblo0-dev is already the newest version.
docbook-utils is already the newest version.
Note, selecting libexpat1-dev instead of libexpat-dev
libexpat1-dev is already the newest version.
libdbus-1-dev is already the newest version.
pyqt-tools is already the newest version.
python-dbus is already the newest version.
E: Couldn’t find package python-qt

Robin fixed this later and I have no idea what he did. I had already checked that I had python-qt3 installed and somehow he made Ubuntu see it. Next I downloaded the ffado sources and placed them in the directory and tried to compile using Scons. I had never tried to compile anything before so I did not realize that scons had to be run from inside the folder of the program that you wish to compile.

victoria@u-live:~$ scons DEBUG=yes

scons: *** No SConstruct file found.
File “/usr/lib/scons/SCons/Script/Main.py”, line 825, in _main
victoria@u-live:~$ scons install

Scons cannot find the SConstruct file unless it is run in the directory folder that the text file lives in. I figured this out and I was pleased to see a string of code scroll down the terminal screen. I was less happy when the install terminated with the error message:

xdg-icon-resource install –size 64 –context apps support/xdg/hi64-apps-ffado.png
scons: *** DirNodeInfo instance has no attribute ‘csig’
scons: building terminated because of errors.

I tried to continue and received some help from the guide posted here. I decided not to try to hack the code in the SConstruct file as they suggest and looked for another method. There is now some new information posted by Pieter here, but at that time, after a bit of searching, I gave up and decided to continue with the install instructions. Later Robin came to my rescue and said something that contained the words “usr home folder”. I did not understand what he said and he types quickly into the terminal, but the result was positive and the driver is installed.

victoria@u-live:/usr/share/applications$ cd /usr/local
victoria@u-live:/usr/local$ ls
bin etc games include lib man sbin share src
victoria@u-live:/usr/local$ cd bin
victoria@u-live:/usr/local/bin$ ls
ffado-bridgeco-downloader ffado-fireworks-downloader
ffado-dbus-server          ffadomixer
victoria@u-live:/usr/local/bin$ ffado
ffado-bridgeco-downloader   ffado-fireworks-downloader
ffado-dbus-server           ffadomixer
victoria@u-live:/usr/local/bin$ ffadomixer

——————————————————-

Another frustrating bit of business with the command:

$ sudo apt-get install subversion libtool automake

I could not get it to run, but I installed jack from the trunk in a separate folder and I think that is the source of my present problems. Jack installed very well, but now I think I am running two versions of Jacd and that is confusing to my OS. I do not have Robin B. to help me now, so I just tried running the above cmnd again. Surprised and pleased, I watched the install proceed:

victoria@u-live:~$ sudo apt-get install subversion libtool automake
[sudo] password for victoria:
Reading package lists… Done
Building dependency tree
Reading state information… Done
subversion is already the newest version.
libtool is already the newest version.
The following NEW packages will be installed:
automake
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 519kB of archives.
After this operation, 1712kB of additional disk space will be used.
Get:1 http://ca.archive.ubuntu.com hardy/main automake 1:1.10.1-2 [519kB]
Fetched 519kB in 2s (182kB/s)
Selecting previously deselected package automake.
(Reading database … 245531 files and directories currently installed.)
Unpacking automake (from …/automake_1%3a1.10.1-2_all.deb) …
Setting up automake (1:1.10.1-2) …

Now I have the automake application installed jackd may work better or I might have to remove it from the system and reinstall. I plan to use this post to ask for help with my lack of success, but I feel I am making some progress because my terminal reads:

victoria@u-live:~$ cd libffado
victoria@u-live:~/libffado$ tests/test-ffado Discover
verbose level = 0
Using ffado library version: libffado 2.0.900-1319

06565751473: Debug (devicemanager.cpp)[ 555] discover: Discovery finished…
06565751641: Debug (devicemanager.cpp)[1045] showDeviceInfo: ===== Device Manager =====
06565751717: Debug (Element.cpp)[ 109] show: Element DeviceManager
06565751769: Debug (devicemanager.cpp)[1053] showDeviceInfo: — IEEE1394 Service 0 —
Iso handler info:
Dumping IsoHandlerManager Stream handler information…
State: 2
no message buffer overruns

————————————————————-

Thanks Robin B. for your hospitality and your help! Here are some flowers for you.

WordPress Upgrade to 2.6.1

Using Fantastico in Bluehost I was able to smoothly upgrade my WordPress install this morning. Although WordPress urges me to upgrade to 2.6.2, Fantastico sees 2.6.1 as the latest version, so I cannot upgrade further at present. I also activated the podpress plug-in and some other multi-media tools. I look forward to exploring streaming content on my blog, both audio and video.

When I first installed WordPress, I had never administrated content management software before. The default is to install to the root folder, so that is where I put the program. Now, I am thinking about expanding the Live More Lightly Site to include a regular web site in addition to the blog, I find the root install is a problem. I have since installed and administer WordPress on other websites and it is just as easy to install to a new folder and link to the blog from the site menu. I would advise anyone installing WordPress to build a home page and put a link to the blog on that page. This will allow for easy site expansion as more links can be added to the home page and the blog will remain in the second-level folder where it was installed.

To avoid having to reinstall and reconfigure my site, I am constructing a Site Map page that will help to direct readers to the content they want to view and to the static pages that give information about the project. Many people find the three column layout confusing as there is so much information and different filtering options. The Site Map should help to demystify blog navigation and I welcome feedback when I get it published.

News Flash: The Live More Lightly Guestbook Page is now functional using the DMS Guestbook plug-in. Try it out, then I will know it works for sure.

SLR Camera – Image Capture

Now I have had the opportunity to look through two examples of excellent camera technology, I find myself increasingly attracted to continuing the experience. The first time I held such a camera was at the Madu Sari gamelan performance, “New Javanese Shadows“when a friend of mine asked me to hold his camera. My first impression can only be described by referring to a Hindu myth often told about the young Krishna. For those not familiar with Hindu mythology, the incarnations of the god Vishnu are many, but this story is about his time as the human Krishna.

On one occasion, when Krishna was still a child, he revealed his true god-self to his mother by asking her to look in his mouth. When she complied, she was astonished to see the entire universe inside the mouth of her child. When I looked into that camera, I saw a glimpse of the infinite — I was astonished. The photographer who owned the magic box enthusiastically started informing me of the technical details in a language full of numbers that I did not understand. This machine may be described by numbers, as the universe can be modeled mathematically, but the impact of the revelation I had experienced created a bookmark in my mind that I return to in wonder.

My next reaction was more practical, as the Virgo reasserted her presence. If everyone had a camera like that, my opportunities for employment as a graphic artist would be seriously reduced. There was no noise in the image, it was balanced and in sharp focus. If the capture mechanism was as pristine as the view, the images would reflect a hyper-realism that would need few adjustments. My daughter later comforted me by pointing out that many of these cameras are owned by individuals who can cause them to malfunction and that composition skills are still required. Even the best images can benefit from layout, design and story, so my production skills will still be needed.

The term “multi-media artist” has often been applied to my skill sets in production. I know that if I am not being paid, I do music, music technology and saving the world. Some practical part of me knows that my time will not allow any more addictions. I am already being drawn away from my “Live More Lightly Project” too much by other musical entanglements. I have to complete a book prototype this month. Move on. Continue reading SLR Camera – Image Capture

Air-cooled Bike in a Water-cooled World

The cooler weather has arrived, but the sun is shining as Vancouver sees the last cloudless days for a while. This weather is the prime season for my motorcycle as I no longer have to worry so much about over-heating my air-cooled engine. In the heat of summer, a traffic jam caused by the endless road work or skytrain construction that we are blessed with, can cause immediate concern for the temperature of the two middle cylinders. With four heat producing cylinders, the temperature of the engine rises quickly and I am wise to kill the engine and push the big machine as much as I can through inching traffic. The armor that I wear starts to stick to my skin and my patience starts to erode.

Post-Labour Day September, the cooler air and reduced traffic on the highways made the idea of a weekend trip to Seattle with my daughter seem like a wonderful diversion. I still don’t have the video camera or hard luggage, but we were only going for a weekend. This was the longest trip I had ever taken with a passenger, but my daughter knows how to become part of the bike. I felt confident that it would be safer than her last trip in August on the bus shuttle service from Vancouver to Seattle. The bus was tied up in a four hour border wait and then was hit by a semi-trailer truck in Seattle. I had a premonition of danger when I dropped her off at the bus, but I had thought it was related to the helmet I was lending her. She told me that she was going to be a passenger with a young man who had recently started riding. I was worried about this idea, but at least she had an approved helmet. After the bus incident, I have to say that I am going when my time comes and I guess my daughter is too. I was worried about the motorcycle as statistically, most accidents happen to new riders, but sometimes I have to let go and say, despite my considerable investment, “It is your life”.

I don’t push my luck though, and I was careful to purchase additional medical insurance for us both before we left. Given my daughter’s proclivity for dangerous episodes, I bought it for a year. I departed from work earlier than usual, but I wanted to wait until the worst of rush hour was over before facing the suburban traffic snarls. We were packed and mobile by 6:30pm taking the South Granville bridge and driving though Richmond to avoid the Oak St line-up. Even though it would take the same amount of time, it is time with air over the cylinders. It was windy on the Highway 99 stretch between Richmond and the border, with nothing but open farm fields and suburban developments to block the wind off the ocean. I was glad to have the extra weight on the back as we passed a few semi-trucks. With the Yamaha FJ 1200, there is always plenty of power, but I am so light I often get blown around by the wind. There were some darker clouds ahead and was a bit concerned about rain in the small mountainous region near Bellingham. We were being buffeted by strong cross-winds and the smell of rain was in the air.

As I crouched to try to keep my windblown hair from whipping my passenger, we passed a cushy Honda Goldwing with full fairing and a big passenger seat with backrest built into the luggage. The rider had a sense of humour as he gestured to my daughter that his back seat would be far more comfortable for her than mine. At 100km per hour (legal speed) it was pretty amusing. He turned off at White Rock and I climbed the big hill towards the border. Continue reading Air-cooled Bike in a Water-cooled World

Electronics Product Stewardship Canada

The lure of High Definition is keeping me interested in purchasing a camcorder that I can mount on the motorcycle or remove for shooting the places I visit and the people I meet. Lifecycle sustainability is an important factor in my choice and it seems that the major companies are becoming aware of this. I searched for an environmental report comparing major electronics companies that manufacture camcorders I am interested in purchasing, especially Sony, Canon, JVC and Panasonic. I found some interesting information but no side-by-side comparison.

In Canada we are lucky to have non-profit societies that are working hard on the problem of electronics disposal. Electronics Product Stewardship Canada is developing an “industry led solution” to see electronic waste properly managed. Of the four companies I am interested in, only JVC is not a member of this coalition. The organization is nationwide and has influenced policy in British Columbia so that electronics can be recycled here. Unfortunately, there is a large list of items that are not accepted, so I have to keep storing my broken VCRs until the program expands.

As part of the “Live More Lightly Project” I hope to raise awareness of these programs so that more people will utilize them and keep dangerous materials out of landfill sites. There is a fee to re-cycle electronics but there are depots throughout the province and a handy map to locate a depot near you. Other provinces have similar programs and I encourage you to use them.

Re-use of working electronics is always preferred to disposal and organizations such as Free Geek will accept equipment that is not state-of-the-art, refurbish it and donate it to a needy charity or sell it in their computer thrift store.

Some companies are putting more effort into product stewardship and environmental programs and this will influence my purchasing decision. See a short description of each company’s efforts below. Continue reading Electronics Product Stewardship Canada

Where Did the Summer Go?

It’s raining in Vancouver again and I know this is a foreshadowing of the winter to come. A warning to finish up with summer affairs quickly because the remaining sunny days are shortening. There is still time for a ride during the autumn and I hope I can get my bike ready to go on a test run before the rain rolls in and parks.

++++++++++++X+X+X++++++++++++

Progress of Live More Lightly Project

Book Portion

Cover – draft complete, photo rights purchased, still writing material for the back

Interior – 3 sections planned: First Edition is for everyone, Second Edition is for Choirs

Front Matter (Title, CIP, Dedication, Index, Foreword)
Workshop Guide
Sheet music (positioned so material lays flat in the middle of the book)
Section break photo page (2)
Environmental Suggestions (for song lyrics)
Music Materials (instructional material on basic rhythm patterns and melody ideas)
Creative Commons License

Next Step: Finalize draft so that number of pages can be used for print quote.

Remaining tasks: Source paper disk sleeves for book insert, try a few more fonts, source line drawing for logo, disk label and song sheet cover, source environmentally inspiring photos.

Disk – 4 sections possible

Music (includes recording of the song with and without vocals and helpful loops for practicing)
Parts for printing in booklet form
Workshop support materials (includes poster and other materials that may be helpful)
Possible power-point of workshop material
Possible demo video of sample workshop

Next Step: Create a demo book and CD

Remaining Tasks: Finalize “Basic Arrangement” with piano accompaniment, Record material, Video workshop, Create Power-point presentation, Complete support materials

Workshop Portion

Local workshops in Vancouver being organized.

Next step: Create sample workshop video and workshop promotional material.

Motorcycle still not ready to tour.

Next Step: Get luggage and camera on-bike.

++++++++++++X+X+X++++++++++++

A project like this can be daunting, but I am trying to organize the tasks into bite-sized sections. Project administration is another area that is receiving a lot of attention. There are grant deadlines coming up and I am trying to balance the time invested with the possibility of actually getting a grant. Sponsorship is another possibility, but I will have to be careful to keep the focus on the individual actions that people can do and not a corporate agenda.

I have been encouraged by the response to my blog and the many encouraging comments that people have made. When I tell people about the project I get different reactions, from supportive to completely negative. It does take a certain kind of stubbornness to see a project like this through to the end. By this time next year, I hope to have my video recorded and my journey completed.

Music Festival Vancouver

Festival Vancouver has a special place in my heart because I have met people who have become important in my life at past concerts and the music is always exceptional. The first announcement of the evening was a change of name to “Music Festival Vancouver”, apparently there has been some confusion about the festival focus . . .

This year Music Festival Vancouver held concerts in VanDusen Botanical Garden for the first time. It was a great choice for a venue and the large grassy field, where plant sales are usually held, was prepared by adding a large covered stage on the north end. The World at the Garden Series featured three great concerts and friends have told me that the guitar led Yamandu Costa Trio (Brazil), who played on Friday, Aug 15 was amazing. I chose to go to Salsa Dura, the “hard salsa” band conducted by Sal Ferreras on the following Sunday evening because of guest Ernán López-Nussa, piano.

I first encountered this accomplished Cuban pianist in 2003, when I heard him play at UBC, then later during in the week at the Commodore Ballroom. Ernán López-Nussa opened for John Kosrud’s “Orquestra Goma Dura”, one of Vancouver’s great big salsa bands. I had the opportunity to dance with Ernán after his set while the second band was playing. I had a great time that evening and looked forward to hearing him again.

It was an overcast evening after weeks of sunny summer weather and concert attendees knew there was a strong probability that we would be on the receiving end of some falling raindrops. I decided to go despite the rain and packed an umbrella on my motorcycle (closed).

The garden was beautiful and I had a few minutes to wander around before the music began. VanDusen Gardens is one of Vancouver’s treasures as it is watched over by a gardeners and offers an ever-changing pallet of colour, scent and form. I couldn’t linger too long, as Celso Machado was opening and I did not want to miss a moment of his show. Celso is one of the few solo performers who has packed the Ironworks during the Jazz Festival (2007) and he is a favourite of local audiences.

In addition to playing guitar and singing in the styles of his native Brasil, he has learned to play African kora and South Indian kanjira, a snakeskin covered tambourine. Celso is known for his mischievous attitude to displaying his virtuosity and this evening was no exception as he performed a percussion solo on his microphones and water bottle. He did bring out the kora and the exquisite timbre of African strings infused the garden.

The intermission was cut short as the rain began to fall and the original plan, of allowing the audience to wander the garden while the second group prepared to play, was shelved. After a speedy set-up, the main attraction was ready, with two female singers, a brassy horn section, piano and three percussionists. Continue reading Music Festival Vancouver